Nomad FAQs
What size headset does the Nomad use?
Newer Nomad frames use a 1.5" headtube. The frames are shipped with reducers so you can use any 1 1/8" headset/fork as well. There are also plenty of reducing headsets on the market which allow use of the larger bearings of the 1.5" system along with your 1 1/8 fork. Of course, to get the full benfit of 1.5, use a proper 1.5" steerer fork for a stiffer front end. Older Nomad frames had a 1 1/8" head tube.
What size seatpost do I need?
The Nomad uses a 30.9mm seatpost. Make sure you always have it inserted a minimum of 4" (100mm).
What size shock does the Nomad use?
8.5" x 2.5" (216x 63mm)
The mounting hardware is 22mm wide with a 9.53mm (3/8") through hole.
What size fork should I use on the Nomad?
For a more XC oriented geometry, a 145mm fork (a Rockshox Pike, for instance) is great. Most riders will be happiest with a 160mm fork. Fox and Rockshox both make lightweight 160mm travel forks available in 1 1/8" and 1.5". 180mm forks are not ideal for the geometry of the bike, but are allowable under warranty.
What size seat collar do I need for the Nomad?
34.9mm (supplied with frame)
What size front derailleur do I need?
A shimano 34.9 top swing/ top pull. Anything but saint should do the job.
What size BB do I need?
The Nomad uses a 73mm bottom bracket shell, and a 50-51mm chainline. Pretty much any of the newer external bottom bracket cranks will mount up without issue. The Truvativ stylo and shimano Deore XT are our favorites. If you are using an ISIS setup, you need a 73x113mm bottom bracket.
What size tire will fit?
2.5" is about the max.
What size rotor can I use?
We recommend a 160mm or 185mm rotor, but a 203 will fit in there if you wish.
What kind of chainguide will fit?
Our favorites are the E-thirteen guides (LG1, STS, DRS) and Gamut models. There are no ISCG mounts on the Nomad, so you will need an ISCG adaptor or a bb mount guide.
What kind of rear hub do I need for the Nomad?
Any standard 135x10mm hub will do the trick.